The basic cruise components kit will give you all the parts that every cruise control model uses. It will NOT give all the parts needed to fit the cruise control to any model motorcycle - see details.
The MCS 'universal motorcycle cruise control' is not for the mechanically 'challenged'. if you can't readily understand and answer the following questions about your motorcycle, then you should not be considering buying or installing our universal cruise control kit. Please check with us by email before purchase. The main questions to be answered are:
1. Do you have space to mount the cruise control components (cruise control computer, actuator, cable interface unit, control switch?
2. Does your bike have twin throttle cables (one to open the throttle and one to close it) or a single cable?
3. What is throttle cable travel (how far the throttle cable moves from idle to full throttle)?
4. What is the free length of the throttle cable at the carburettor (throttle body) end of the cable? This is the exposed length of the inner cable from the end of the outer cable or adjuster lock nut to the cable nipple.
5. What thread type and size is used on the adjusters on the throttle cable at the carburettor (throttle body) end?
6. What type and size of cable nipple is fitted to the bikeÆs throttle cable at the carburettor (throttle body) end?
7. Think about where you propose to mount the CIU (Cable Interface Unit) and how long the cable from the CIU to the bikeÆs carburettors (throttle bodies for a fuel injected models) needs to be?
ò In order to do this you have to define where the CIU will go within reach of the existing throttle cable when it is disconnected from the carburettors; AND at the same time:
ò Choose this place to be within 810mm (32ö) of a place you can mount the actuator.
8. What vacuum source is available to operate the cruise control vacuum actuator and what fittings are required?
9. What is the most suitable control switch bracket for your bike?
10. Do you want a black control switch or chromed?
11. What speed sensing arrangement is suitable for your bike?
12. What sort of electrical connectors are on the bike for brake light switch, clutch switch, ignition primary (either ignition coil or tachometer) and speedometer sender?
13. What parts kit/s will be needed to be able to fit the cruise control to your bike?
Your online order must include answers to all these questions in the comments section. The detailed Universal Cruise Control Parts Ordering Guide below will help you answer these fundamental questions.
The basic cruise components kit will give you all the parts that every cruise control model uses. It will NOT give the parts needed to fit the cruise control to any model motorcycle. You MUST add one or more of the A to J parts kits to arrive at a complete kit for your motorcycle. NOTE that this is NOT a universal cruise control kit that will fit any bike. It is a starter kit with basic components to which the custom designed or other universal components MUST be added. Refer to the seperate model list to see what other parts kits are required.
Purchase of the Utilux #61 roll crimper is recommended û see under æMotorcycle Parts & AccessoriesÆ on this web site.
Click here to see the Utilux Crimper User Instructions
Model: Universal Cruise Control Parts Ordering Guide
Click here to see the Universal Cruise Control Parts Ordering Guide
Currency Conversion